Call us now ! Send us an email http://maps.google.com/maps?q=7229 SIMON ST Sacramento United States

Back to Top

Call Us Today!
(916) 387-8186
Call Us Today!
(916) 387-8186

Repairs and Refinishing

Repairs

We can repair any damages to your old hardwood floors.
image-367269-sanding01.jpg?1447806338180
BEFORE
image-367269-sanding01.jpg?1447806338180
AFTER

Sanding, Staining and Refinishing Hardwood Floors

Sanding and refinishing hardwood floors is a very economical way to transform your home into a great indoor setting. It normally takes a couple of days to complete an 800-square-foot job. Our professional crew has many years of experience of sanding, staining and refinishing wood flooring and stair treads.
 
Professional, heavy-duty drum sanders and edgers are used for 95% dust-free work. All the doorways will be sealed by plastic sheets to prevent dust leaks. Normally, the floor is sanded by coarse, medium and fine sandpaper and buffed to ensure that the surface gets the required smoothness. Buffing with 100 to 150 grit sand papers is essential between coats or before the first coat. The floor must be buffed with a buffer machine in order to prepare the floor and remove any unseen scratches.
For a clear finish, a penetrating sanding sealer is applied as the first coat. The sealer may include a color and can be used to seal and stain the floor. Since the sealer is applied right on bare wood, it will be mostly absorbed and will dry in a relatively short time. After the sealer is applied, another coat of polyurethane will be applied. It takes about 24 to 48 hours to apply the last coat. Buffing between each polyurethane coat will be applied.
For color-stained floors, the stain will serve as the protective sealant. A darker stain will take a much longer time to dry than a lighter stain, depending on humidity level, temperature and air circulation. Normally, two or three coats will be applied after the stain. The staining process is time consuming and skill intensive, as we must ensure an even color. The sealer coat is vital to the durability of the finish. If a sealer is not applied, the finish will soon start to peel. This is especially true in areas where there is big humidity fluctuation throughout the year.
 
We offer customer choice of oil-based or water-based polyurethane and semi-gloss or high gloss finish. All our work is guaranteed.
 
Customer's responsibility: The job site has to be clear of furniture before the scheduled date. We can remove carpet at a small extra cost. The floor cannot be walked on during the refinishing process and at least 28 hours after the last coat is applied. After 24 hours, light traffic is allowed. Normal traffic is allowed after 48 to 72 hours. Do not slide furniture on the floor; lift it into place after 48 hours. Area rugs can be put down after 14 days on water-based finishes and 30 days for all other finishes. Furniture and rugs placed too soon may result in finish or surface damage. Some area rugs and padding may damage or discolor the finish. This type of damage, as well as color change due to aging and intense sunlight, is not the responsibility of AA Peter Floor Sanding Inc.
 
Should you have any questions, please feel free to contact us. References are available on request.

Call Us Today At ♦ (916) 387-8186

  • Reload

  • AA Peter Floor Sanding
    7229 Simon Street
    Sacramento, CA 95828
    Office:  (916) 387-8186
    Cell:  (916) 425-1713
    State License #852910
    In Business Since 1987